View JH30240400BCNUMNFFCWC_8977835.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

jh30240400b ver: 0.1 - 0 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . module no. jh30240400b jewel hill electronic co.,ltd . specifications for lcd module e-mail: sales@jhlcd.com website: www.jhlcd.com
jh30240400b ver: 0.1 - 1 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . table of contents lcm number system 1.general specifications????????????????...3 2.outline draw???????????????????????.4 3.absolute maximum ratings???????????????.5 4.electrical specifications???????????????...6 5.optical characteristics????????????????.12 6.reliability????????????????????????16 7.quality level??????????????????????.17 8.precautions for use of lcd modules?????????..21 9.revision history????????????????????...24 sample approved report?????????????????
jh30240400b ver: 0.1 - 2 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . lcm number system special code: p: pin;c:c onnect;o: other;........ serial nu mbera--z. ic cont roller: c:with controller; n:without controller; o:other; w:white; backligh t color: t: tft jh 30 240400 b t n f m n t f l w n -v00- sc version number: v00v99 backlight mode: polarizer type: serial number:c: cstn graphic modules:number of commons and segments lcm size;18:1.8";20:2.0"; 22:2.2"....... connector: character modules: t:transmissive; f:transflective: o: other temperatu re range: n: normal temperature; m :middle temperature; w: wide temperature; o:super wide temperature h:heatseal; z:zebra; f:fpc o:other; l:led; e:el; c:ccfl; l: left(9:00); r:right(3:00);f:full view u: upper(12:00); d:down(6:00); viewing di rection: n: without touch panel; y:with tohch panel with tp: jewel hill electronic co.,ltd. n: negative; o:other; lcd display mode:
jh30240400b ver: 0.1 - 3 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 1. general specification item display panel remark display format 240*rgbx400(h) dots colour 262k colours pixel pitch 0.054mmx0.162mm active area 38.88mm(w)*64.8mm(h) outline dimensions 45.04mm(w)*77.00mm(h)*2.0mm(t) lcd type ips polarizer mode transmissive,normally black view angle(u/d/l/r) 80/80/80/80 deg driver ic s6d04d1 backlight led backlight color white backlight driver type external power
jh30240400b ver: 0.1 - 4 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 2. outlinedraw yu xl yd xr 1 37 double side tape t=0.05mm a k1 k2 k3 k4 k5 yu xl yd xr 37 1 a k1 k2 k3 k4 k5 yu xl yd xr 37 1 hunter double side tape t=0.05mm pin name 1 yu 2xl 3 yd 4xr 5 gnd 6 iovcc 7 vcc 8 fmark 9 cs 10 rs 11 wr 12 rd 13 d0 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 reset 35 nc 36 a 37 k1 k2 k3 k4 lcm-id k5 d15 d14 d13 d12 d11 d10 d9 d8 d1 d2 d3 d4 d5 d6 d7 yu xl yd xr
jh30240400b ver: 0.1 - 5 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 3. absolute maximum ratings the following are maximum values which, if exceeded may cause operation or damage to the unit. item symbol min . typ. max. unit remark power supply for logic v b b b b b b b b b cc ? v b b b b b b b b b ss 2.4 - 3.3 v power supply for lcd v b b b b b b b b b gh ? v b b b b b b b b b ss 12 14 16 v input voltage v b b b b b b b b b gl -10 -8 -6 v storage temperature t b b b b b b b b b st b b b b b b b b b -20 - 70 operating ambient temperature t b b b b b b b b b op b b b b b b b b b -10 - 60
jh30240400b ver: 0.1 - 6 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 4. electrical specification 4.1 electrical characteristics (unless specified, the am bient temperature ta=25 )
jh30240400b ver: 0.1 - 7 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd .
jh30240400b ver: 0.1 - 8 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 4.2 led backlight specification
jh30240400b ver: 0.1 - 9 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 4.3 interface signals pin no. symbol description 1 lcm-id tbd 2 xl touch panel connection(nc) 3 yu touch panel connection(nc) 4 xr touch panel connection(nc) 5 yd touch panel connection(nc) 6 gnd ground 7 iovcc a power supply for the internal logic(1.65-3.3v) 8 vcc a power supply for the internal logic:vcc=2.8v 9 fmark frame head pulse signal 10 cs lcd chip select input pin 11 rs reg selection for command/data 12 wr write execution control pin 13 rd read execution control pin 14-29 db0-db15 data bus 30 reset reset pin 31 nc no connect 32 a backlight anode 33 k1 backlight cathode1 34 k2 backlight cathode2 35 k3 backlight cathode3 36 k4 backlight cathode4 37 k5 backlight cathode5
jh30240400b ver: 0.1 - 10 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 4.4 interface timing chart
jh30240400b ver: 0.1 - 11 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd .
jh30240400b ver: 0.1 - 12 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 5. optical specification
jh30240400b ver: 0.1 - 13 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd .
jh30240400b ver: 0.1 - 14 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd .
jh30240400b ver: 0.1 - 15 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd .
jh30240400b ver: 0.1 - 16 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 6. reliability
jh30240400b ver: 0.1 - 17 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 7. quality level 7.1. notes for quality standard
jh30240400b ver: 0.1 - 18 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 7.2. standards of inspection items
jh30240400b ver: 0.1 - 19 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd .
jh30240400b ver: 0.1 - 20 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd .
jh30240400b ver: 0.1 - 21 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 8.precautions for using lcd modules handing precautions (1) the display panel is made of glass and polarizer. as glass is fragile, it tends to become or chipped during handling especially on the edges. please avoid dropping or jarring. do not subject it to a mechanical shock by dropping it or impact. (2) if the display panel is damaged and the liquid crystal substance leaks out, be sure not to get any in your mouth. if the substance contacts your skin or clothes, wash it off using soap and water. (3) do not apply excessive force to the displa y surface or the adjoining areas since this may cause the color tone to vary. do not touch the display with bare hands. this will stain the display area and degraded insulati on between terminals (some cosmetics are determined to the polarizer). (4) the polarizer covering the display surface of the lcd module is soft and easily scratched. handle this polarizer carefully . do not touch, push or rub the exposed polarizers with anything harder than an hb penc il lead (glass, tweezers, etc.). do not put or attach anything on the display area to avoid leaving marks on. condensation on the surface and contact with terminals due to cold will damage, stain or dirty the polarizer. after products are tested at low temperature they must be warmed up in a container before coming is contac ting with room temperature air. (5) if the display surface becomes contami nated, breathe on the surface and gently wipe it with a soft dry cloth. if it is heavily c ontaminated, moisten cl oth with one of the following solvents - isopropyl alcohol - ethyl alcohol do not scrub hard to avoid damaging the display surface. (6) solvents other than those above-menti oned may damage the polarizer. especially, do not use the following. - water - ketone - aromatic solvents wipe off saliva or water drops immediately, contact with water over a long period of time may cause deformation or color fading. avoid contacting oil and fats. (7) exercise care to minimi ze corrosion of the electrode. corrosion of the electrodes is accelerated by water droplets, moisture condensation or a current flow in a high-humidity environment. (8) install the lcd module by using the mounting holes. when mounting the lcd module make sure it is free of twisting, warping and di stortion. in particular, do not forcibly pull or bend the i/o cable or the backlight cable.
jh30240400b ver: 0.1 - 22 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . (9) do not attempt to disassemble or process the lcd module. (10) nc terminal should be open. do not connect anything. (11) if the logic circuit power is off, do not apply the input signals. (12) since lcm has been assembled and adjust ed with a high degree of precision, avoid applying excessive shocks to the module or making any alterations or modifications to it. - do not alter, modify or change the shape of the tab on the metal frame. - do not make extra holes on the printed circuit board, modify its shape or change the positions of components to be attached. - do not damage or modify the pattern writing on the printed circuit board. - absolutely do not modify the zebra r ubber strip (conductive rubber) or heat seal connector. - except for soldering the interface, do not make any alterations or modifications with a soldering iron. - do not drop, bend or twist lcm. storage precautions when storing the lcd modules, the following precaution is necessary. (1) store them in a sealed polyethylene bag. if properly sealed, there is no need for the dessicant. (2) store them in a dark place. do not expos e to sunlight or fluorescent light, keep the temperature between 0c and 35c. (3) the polarizer surface should not come in contact with any other objects. (we advise you to store them in the contai ner in which they were shipped). others liquid crystals solidify under low temperatur e (below the storage temperature range) leading to defective orientation or the gener ation of air bubbles (black or white). air bubbles may also be generated if the module is subject to a low temperature. if the lcd modules have been operating for a long time showing the same display patterns, the display patterns may remain on the screen as ghost images and a slight contrast irregularity may also appear. a normal operating status can be regained by suspending use for some time. it should be noted that this phenomenon does not adversely affect performance reliability. to minimize the performance degradation of t he lcd modules resulting from destruction caused by static electricity etc., exercise ca re to avoid holding the following sections when handling the modules. - exposed area of the printed circuit board. -terminal electrode sections.
jh30240400b ver: 0.1 - 23 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . .rohs compliant warranty.
jh30240400b ver: 0.1 - 24 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . 9. revision history. version revise record date 00 original version 11-06-30 0.1 perfect the ver00 spec commany internal modify. 13-08-01
jh30240400b ver: 0.1 - 25 - issue date: 2013/ 08 / 01 jewel hill electronic co. , ltd . sample approved report ( ??? ) sample model no. ( ?? ) jh30240400b sample series number no. ( ? ) sample quantity ( ? ) 2pcs color/type ( ? / ) tft/negative viewing direction ( ? ) full view driving method ( ) - logic voltage ( ? ) 2.8v lcd vop (lcd ? ) - operating temp. ( ? ) -10~60 storage temp. ( ? ) -20~70 polarizer----front ( ?? ) transmissive polarizer----back ( ?? ) controller/driver ic( / ic) s6d04d1 cog backlight color/type ( ? / ? ) led/white backlight voltage ( ? ) - specification ( ) 1bate remarks ( ? ) writ by _________ date _________ aprov by _________ date ________ customer?s approval ( ?? ) 1 function ? ok n.g. 2 driver condition ok n.g. 3 display mode ??? ok n.g. 4 viewing angle ?? ok n.g. 5 backlight ? ok n.g. 6 displaying pattern ? ok n.g. customer?s conclusions ( ? ) ______________________________________ _______________________________________________________________________________ ________________________________________ customer?s signature ?? _____________ date ( ) ___________

▲Up To Search▲

Price & Availability of JH30240400BCNUMNFFCWC

	To Download JH30240400BCNUMNFFCWC Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .